-->

Bernina Drive Belts | Bernina Motor V Belt | Bernina Belts Sizes Types


See the dimensions and sizes of the Bernina vintage belts in the attached tables. Of course I could not describe all the models, if you have a suggestion feel free to write a comment, there is a possibility and error in the dimensions, I write all this based on my own experience, notes and data that I found in the service instructions. Dimensions are written in millimeters, example 5x441, where 5 is the width V of the belt and 441 is the total outer length of the belt.

Vintage Bernina mainly use V belts, Bernina 930 record use teeth belts, and older models of Bernina 125  used rubber round belt. The rubber round belt is not recommended due to stretching and oscillations during sewing on the machine, the susceptibility to stretching interferes with the proper operation of the sewing machine...etc 

BERNINA model / 
class
Main belt to the 
handhweel
Belt to the motor
Bernina 125 / 1950s 5x441 5x250
Bernina 530 Record 1954  5x340 5x340
Bernina 531 1958 5x340 5x340
Bernina 532 - free arm 5x340 5x340
540 Favorit - free arm 5x345 5x340
540 Favorit - flatbed - changeable...5x340
Bernina 600 - changeable...322-340




BERNINA model / 
class
Main belt to the 
handhweel
Belt to the motor
Bernina 707/708/709  5x441 5x229
Bernina 717 Flatbed - 5x236
Bernina 730 Record 
1963-1967
5x350 or 
5x352
5x340
motor type PSE
Bernina 730 Record 
1968-1971
5x350 
5x322
motor type EPL
Bernina 731/732
1963-67
5x350 or
5x352
5x340
Bernina 800/807/809/
810
6x422 also goes with
5x422
5x229
Bernina 801/802/803  6x422 also goes with
5x422
5x229 / 5x244
Bernina 830 Record
6x422 5x260
Bernina 831/832
6x422 
5x260
Bernina 900 Nova  6x422 
5x229
Bernina 930 Record
7.9x462.3 6.35x223.5

7 comments:

  1. Handhweel upper motor v belt 6x422
    Part # 305.201.13V
    Fits Bernina models 801, 801S, 802, 802S, 803, 803S, 807, 808, 809, 810, 830, 831, 832, 833, 900

    ReplyDelete
  2. Motor belt Upper: 182XL031, 91 Teeth
    Part # 305.247.03
    Fits Bernina models 930, 931, 932, 933

    ReplyDelete
  3. Anonymous20.6.23

    I would like to buy Drive belts for Bernina 810 - Dimensions are 5X229 and 6X422 - Do you sell them . or could tell me where to buy them please - with thanks

    ReplyDelete
    Replies
    1. No, I'm not selling, the original belts don't exist, you have to find a replacement

      Delete
  4. Anonymous18.12.23

    For the Bernina 807, with a 5x229mm belt. The aftermarket belts are 6 mm. Do you think the 6 mm belt will still be ok? Because the belts are sometimes undersized, I've going to try a 240 mm, and am hoping for the best.

    ReplyDelete
    Replies
    1. Your Benina had a 5 mm wide belt and you bought a slightly longer 6 mm wide one.? The only thing I can say is that you call back and let us all know if your version worked.
      It is certain that the 6 mm belt will not have a good fit on the pulley and this can lead to slipping.

      Delete

SEARCH