Walking Foot | Walking Presser Feet | Stopica Za Dvostruki Transport

"Walking foot" or accessory for home sewing machines "double transport presser foot". Namely, by installing this accessory foot, the sewing machine also got the upper row of transport teeth (feed dog), depending on the manufacturer, there are plastic and metal ones.

"Walking foot" stopica (eng.pješačka stopala), na naš jezik ja bih ovaj dodatak za kućne šivaće mašine nazvao "dodatak ili stopica za dvostruki transport". Naime, postavljanjem ovog dodatka-stopice, šivaća mašina dobija i gornji red transportnih zubaca,zavisno od proizvođača, ima ih plastičnih i metalnih.

Walking Foot Presser Foot sewing multiple fabric layers evenly.

What Is a Walking Foot Presser Foot?

A walking foot (also called an even-feed foot) is a special presser foot designed to feed the top layer of fabric at the same speed as the machine's feed dogs move the bottom layer. This helps prevent shifting, stretching, and puckering when sewing multiple layers.

It is especially useful for:

• Quilting and patchwork
• Leather and vinyl
• Thick fabrics and denim
• Laminated materials
• Matching stripes and plaids
• Sewing several layers with batting

For the best results, use a slightly longer stitch length than usual and avoid pulling the fabric while sewing.

Advantages of a Walking Foot

• ✔ Prevents fabric layers from slipping.
• ✔ Produces more even stitches.
• ✔ Ideal for quilting.
• ✔ Reduces puckering on difficult fabrics.
• ✔ Makes sewing thick materials much easier.

Share on Pinterest

Installation is extremely simple, it is necessary to remove the standard foot completely and put a Walking Foot in its place, with the part that protrudes and goes on the screw that tightens the needle should be placed depending on whether it is flat or in the shape of the letter "U" .

This accessory is usually accompanied by a direction holder that is used in various situations, and most often in the so-called "wadding", that is, when a thin "wadding, thermowadding, felt" is placed between two thin fabrics ... (there are various names). 

When making a purchase, you should pay attention to whether it is suitable for your sewing machine, there are different sizes and for different models, some are universal, so they can be used on several models.

Ugradnja je krajnje jednostavna, potrebno je standardnu stopicu skinuti u potpunosti a na njeno mjesto postaviti "walking foot" s tim da dio koje je isturen i ide na vijak kojim se priteže igla treba postaviti ovisno da li je ravan ili u obliku slova "U".
Uz ovaj dodatak najčešće ide i "držač pravca koji se koristi u različitim situacijama a najčešće pri tzv."vatiranju", to je, kada se između dva tanja štofa postavi tanki "vatelin,termovata,filc"...(postoje razni nazivi).Pri eventualnoj kupovini treba obratiti pažnju da li odgovara za vašu šivaću mašinu, ima ih raznih dimenzija i za različite modele, neki su univerzalni pa se mogu koristiti na više modela. Srodne i slične teme : Stopice za ušivanje kedera